Rear-Release D-Sub
17 Series Rear-Release D-Sub
Reliable, high density rear-release connectors offer superior features and low installation cost over other popular crimp and solder "D" types. Contacts are stamped and formed, and provides an insulation crimp feature which provides strain relief and insures the integrity of the crimp. The contacts are loaded with fingertip pressure and removed with a simple tool from the wired side (the rear of the connector). The contact and crimp are surrounded by the dielectric which eliminates the need for potting or sleeving to protect against shorting.
Features
- Economical crimp contact (High speed stripper crimp tool and manual hand crimp tool available).
- Crimp contacts with insulation support feature.
- Shrouded contact and crimp protect against shorting or arcing.
- Removable contact.
- 2 pieces black thermoplastic UL 94 VO rated insulator.
- 5 shell sizes E, A, B, C, D.
- 5 configurations 9, 15, 25, 37, 50.
- Polarization by "D" shape.
- Hoods and locking accessories are available.
- UL recognized.
Shell
- EMI/ESD configuration. Bright tine plating and grounding indents on plug front shells.
Dielectric
- Two piece black thermoplastic UL 94 VO rated.
Contacts
- Stamped and formed.
Plating
- 0.000020 inches gold over nickel.
Crimp tensile strength
- 20 AWG = 18 lb
- 22 AWG = 15 lb
- 24 AWG = 10 lb
- 26 AWG = 7 lb
- 30 AWG = 3 lb
Wire Types
- 20 to 30 AWG max. insulator over diameter 0.050(1.27).
Temperature
- -670 F (-550 C) to +2570 F (+1250 C)
Ratings
- Voltage Rating: 500 VAC (sea level)
- Current Rating: 5A
