600 A 15 kV Class T-OP II Deadbreak Connector

T_OP_II_Deadbreak_Connector_15_60012.jpg

The Eaton Cooper Power series 600 A, 15 kV Class T-OP II Deadbreak Connector is used to terminate high voltage underground cable to transformers, switches, switchgear and other apparatus. It is fully shielded, submersible and meets the requirements of IEEE Std 386™ standard – “Separable Insulated Connector Systems.”

The 200 A three-phase rated loadbreak interface provides a means for obtaining a live test, visible ground and visible break using a hotstick. It also provides a convenient location for a M.O.V.E. arrester or grounding elbow. Eaton offers an exclusive optional capacitive test point similar to test points on 200 A elbow connectors. This allows use of Type “TPR” Series Fault Indicators. T-OP II connectors are designed for use on solid dielectric cable (XLPE or EPR) with extruded semi-conducting shields and concentric neutral, with or without a jacket.

Document Number Title
CA650017EN/ Old 600-12 600 A 15 kV Class T-OP II Deadbreak Connector
BR100003EN/ Old B100-02024 Specifier's Guide - Components Master Catalog
PA650008EN/ Old B600-06062 600 A and 900 A Connector Systems-Make the Connection
PA100004EN/ Old B100-96011 200 A and 600 A Molded Rubber Product Application
MN650047EN/ Old S600-12-1 600 A T-OP II Terminator Operation Instructions
MN650048EN/ Old S600-12-3 600 A 15/25 kV Class T-OP II Connector Assembly Installation Instructions
  15 & 25 kV T-OP II with Tape Shield Cable (5000050740)