600 A 15 kV Class T-OP II Deadbreak Connector

T_OP_II_Deadbreak_Connector_15_60012.jpg

The Eaton Cooper Power series 600 A, 15 kV Class T-OP II Deadbreak Connector is used to terminate high voltage underground cable to transformers, switches, switchgear and other apparatus. It is fully shielded, submersible and meets the requirements of IEEE Std 386™ standard – “Separable Insulated Connector Systems.”

The 200 A three-phase rated loadbreak interface provides a means for obtaining a live test, visible ground and visible break using a hotstick. It also provides a convenient location for a M.O.V.E. arrester or grounding elbow. Eaton offers an exclusive optional capacitive test point similar to test points on 200 A elbow connectors. This allows use of Type “TPR” Series Fault Indicators. T-OP II connectors are designed for use on solid dielectric cable (XLPE or EPR) with extruded semi-conducting shields and concentric neutral, with or without a jacket.

Catalog Number TP615----
Standard Voltage Class: 15 kV
Maximum Rating Phase-to-Phase (loadbreak reducing tap plug only): 14.4 kV
Maximum Rating Phase-to-Ground: 8.3 kV
AC 60 Hz 1 Minute Withstand: 34 kV
DC 15 Minute Withstand: 53 kV
BIL and Full Wave Crest: 95 kV
Minimum Partial Discharge Extinction Voltage: 11 kV

Features

  • 900 amp rating available.
  • Installation on jacketed concentric neutral cable may require additional sealing material. Adapters are available for terminating tape shield and drain wire jacketed cable.

Related Products and Accessories

Related Solutions