Hydraulic Compression Tools
Battery Powered Compression Tool
The BH-68 Compression Tool from Cooper Power Systems was designed to install Serv-ens, Squeezons, lugs, sleeves and other industry connectors.
It can be easily carried and used in limited access areas because of its 180˚ swivel head and compact design. Its six ton output is equal to our O-60 Series Compression Tools.
Type WH3 Tool
Our WH3 Compression Tool from Cooper Power Systems features a large 1 1/2" jaw opening between dies to allow work on very large connectors. Its head is capable of rotating a full 360° for ease of use in hard to reach applications. The fast moving ram greatly reduces actual crimping time, while the internal “pop-off” valve automatically releases pressure at 12 tons of force in the jaws. This is accomplished by a two stage pump. The WH3 has been designed with an even weight distribution to make it easier to hold the tool with arms extended. An easy twist handle mechanism allows single handed release of the ram for increased ergonomic control. The WH3 accommodates all existing WH2 dies, and is designed for over 100,000 crimps.
Battery Powered BH-4 Compression Tool
The BH-4 was designed to install Servens, Squeezons, lugs, sleeves and other industry connectors. It can be easily carried and used in limited access areas because of its 340˚ swivel head and compact design. Its 12 ton output is equal to our WH Series Compression Tools.
Power Operated Remove Hydraulic Tool
The PH13 Tool features the same 1 1/2" jaw opening between dies that the hand hydraulic WH3 Tool is equipped with. We have developed two separate versions to allow compatibility with either a 4,000 or 10,000 psi system. This new tool accommodates all existing WH2 and WH3 dies.
WH3 Tool Die adapter
The die adapters, locked into a WH3 tool, allow you to choose a fast acting 12 ton tool with a 1 1/2" jaw opening and 360° swivel without reinvesting in dies.
RH15 Compression Tool
The PH15 is a 15 ton, 10,000 psi remote tool designed for maximum flexibility. Using one of several die holder assemblies, this tool will accommodate Kearney PH2 or PH4, Burndy® Y35 or Y46 dies or Thomas & Betts TBM15 dies. A large jaw opening and streamlined “C” frame makes this tool easier to use on larger connectors.
PH25 Compression Tool
The PH25 is a 25 ton, 4,000 psi remote tool. It is a proven performer, delivering a low cost compression
connection process. Rugged, yet precision head design covers a wide range of transmission fittings. Smallest head size is available on safer, lower pressure 4,000 psi systems.
The Type PH25 Tool can be used in on-ground or liveline connection operations.