ST-5LT

866518.jpg

MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Starter Fitting with DALI Control (ST-5LT) is the starting point for bringing the power and control system together. Converts conventional wiring and merges control wiring into MWS. Branch circuits are fed from the panel to a junction box with conduit and wire, while control circuits are run as Class 1 to meet local codes. The MWS Starter is mounted to the junction box with a ½” threaded lock nut connector. Power and control wires are then connected to the appropriate leads of the Starter

Features

  • Simplified wiring for both power and DALI control
  • UL-Listed under Standard 183 for make or break under load
  • Acts as a starter for both power and control into MWS
  • Cable end supplied with 1/2" connector and lock nut
  • 6" pre-stripped leads for power and control