Video Gallery

hero image

Video Gallery

Informative videos for a variety of Eaton's Cooper Controls products and solutions

 

Fifth Light Lighting Management Software (LMS)

  • Opening the Lighting Management Software - Learn how to open the Fifth Light Lighting Management Software. (Run Time – 00:50)
  • Viewing Programmed Control Strategies - Learn how to view implemented control strategies in the Fifth Light Lighting Management Software.(Run Time – 01:06)
  • Using Profiles - Learn about the use of profiles for easy programming management in the Fifth Light Lighting Management Software. (Run Time – 00:59)
  • Using the Personal Control Module - Learn how to use the personal control features of the Fifth Light Lighting Management Software. (Run Time – 01:27)
  • Creating and Using Workpoints - Learn  how to create and use workpoints to make lighting groups within the Fifth Light Lighting Management Software. (Run Time – 02:00)
  • Using Time Schedule Profiles - Learn about the use of time schedule profiles within the Fifth Light Lighting Management Software.  (Run Time – 02:36)
  • Using Occupancy Detection Profiles - Learn about the use of occupancy detection profiles and energy savings strategies that may be implemented within the Fifth Light Lighting Management Software.  (Run Time – 04:11)
  • Using Wall Mounted Control Profiles - Learn how wall mounted controls are programmed for operation in the Fifth Light Lighting Management Software. (Run Time – 03:11)
  • Using Daylight Harvesting Profiles - Learn about the use of daylight harvesting in the Fifth Light Lighting Management Software. (Run Time – 02:22)
  • Using the Monitoring and Reporting Modules - Learn how the Fifth Light Lighting Management Software monitoring feature can assist with day-to-day maintenance and how the reporting feature can reveal the effectiveness of energy management strategies. (Run Time – 03:03)

Room Controller

  • Room Controller Installation Video Part 1 - Learn how to install the Room Controller, run quick verification tests to ensure your lighting loads and 0-10V dimmable loads are operational, and connect the load wiring to the Room Controller. (Run Time – 05:14)
  • Room Controller Installation Video Part 2 - Learn how to install and connect wallstations, sliders, occupancy sensors, and daylight sensors to your Room Controller. (Run Time – 05:39)
  • Room Controller Installation Video Part 3 - Learn how to verify that your Room Controller operates properly from connected accessories including step by step instructions to set trim levels for 0-10V dimmable loads as well as perform basic daylight level adjustments. (Run Time – 06:52)
  • Room Controller QuicKit Video - Learn what components are packaged in the Room Controller QuicKit. (Run Time – 02:43)

LiteKeeper 4 & 8

  • Clearing Your LiteKeeper - Learn how to clear your LiteKeeper's memory to prepare the panel for initial programming or to start programming from scratch. (Run Time - 01:15)
  • Setting the Date - Learn how to set the LiteKeeper clock's date. (Run Time - 00:41)
  • Setting the Time - Learn how to set the LiteKeeper clock's time. (Run Time - 00:52)
  • Setting Daylight Savings - Learn how to set the LiteKeeper clock's daylight savings time parameters. (Run Time - 01:02)
  • Setting the Astronomical Clock - Learn how to enter your longitude and latitude into the LiteKeeper to allow the panel to calculate sunup and sundown schedules for your area. (Run Time - 02:09)
  • Setting an Offset on the Astronomical Clock - Learn how to enter offsets to the astronomical clock to allow lighting to turn On before or after the calculated Sunup and Sundown times. (Run Time - 02:05)

    Programming a Time Schedule - Learn how to program a time schedule to trigger lighting On or Off in your facility. (Run Time - 05:13)
  • Programming an Astronomic Time Schedule - Learn how to program a time schedule to trigger lighting On or Off at Sunup or Sundown based on the latitude and longitude coordinates entered. (Run Time - 02:05)
  • Reviewing Schedules - Learn how to review the schedules that are programmed into your LiteKeeper controller. (Run Time - 00:55)
  • Changing Schedules - Learn how to change an existing schedule's time, command, relays controlled or day of week. (Run Time - 02:44)
  • Deleting Schedules - Learn how to delete an existing schedule so that it will no longer run. (Run Time - 01:03)
  • Information Gathering for Contact Closure Switches - Learn what information is necessary to program a SPST or SPDT momentary switch, a maintained switch, an occupancy sensor, or contact closure photosensor. (Run Time - 03:06)
  • Programming a Contact Closure Switch - Learn how to program a contact closure switch including setting the switch type and linking the switch to the relays it will control. (Run Time 02:16)
  • Adding a Switch Timer - Learn how to add a switch timer to a programmed switch so that lighting turns off automatically during unoccupied times. You will also learn how to apply a No Timer mask to prevent the switch timers from turning Off the lighting during normal hours of operation. (Run Time - 05:49)
  • Programming Holiday Dates - Learn how to add a holiday date to the system to either prevent schedules from running, or to have a special schedule operate on this date. (Run Time - 02:05)
  • Reviewing Holiday Dates - Learn how to review the holiday dates that are currently programmed in your LiteKeeper system. (Run Time - 00:44)
  • Deleting Holiday Dates - Learn how to delete an existing holiday date. (Run Time - 00:46)
  • Programming Relay Warn Offs - Learn how to program a flash warn sequence on a relay to give users a warning that the lighting is about to turn Off for their area. (Run Time - 01:56)
  • Programming Switch and Remote Warn Offs - Learn how to program a walls switch or a remote command so that it causes the load to flash warn when it is turned off. (Run Time - 02:00)
  • Manually Overriding Relays - Learn how to manually override the relays in your LiteKeeper using the onboard all relay override switch or by using the keypad for individual relay control. (Run Time - 01:36)
  • Viewing Live Status Pages - Learn how to view the live status for a relay to determine what command is in control of the relay. (Run Time - 00:48)
  • Viewing Log Data - Learn how to read the accumulated log data in your LiteKeeper controller. (Run Time - 02:08)
  • Clearing Log Data - Learn how to clear the log data in your LiteKeeper controller. (Run Time - 01:33)
  • Programming a Remote Command - Learn how to program a remote command, such as a Telephone Interface Module command, to control relays in your LiteKeeper. (Run Time - 02:41)
  • Programming Priorities on Time Schedules - Learn how to program a time schedule priority. (Run Time - 02:28)
  • Programming Priorities on Switches and Remotes - Learn how to add a priority or change a command being issued by a wall switch or Telephone Interface Module. (Run Time - 02:35)
  • Programming Masks - Learn how to change the function of a wall switch or remote command during a specified time period using the Masking feature. (Run Time - 03:09)
  • Setting the COM Port for Serial Communications - Learn how to program the COM port to accept a connection to a serial device, such as a Telephone Interface Module or Ethernet Module, or a computer with a Greengate software package. (Run Time - 00:35)
  • Information Gathering for Greengate Digital Switches (GDS) – Learn what information is necessary to program GDS switches including how to plan switch addressing. (Run Time – 01:58)
  • Programming a Greengate Digital Switch (GDS) – Learn how to program a GDS switch including setting the address, assigning the switch type and linking the switch to the relays it will control. (Run Time – 04:42)