Hazard•Gard® EVM Series Explosionproof HID Luminaires

Hazard•Gard® EVM Luminaires are used in:

  • Heavy process industries where flammable or explosive vapors, gases or combustible dusts are present
  • Hazardous areas where long life and low maintenance costs are desired
  • Petroleum refineries, chemical, petrochemical and other heavy process industry facilities
  • Paint spray facilities
  • Hazardous locations requiring elevated ambient capability
Luminaire Type Pendant; Wall Bracket; Ceiling; Stanchion 25°
Hub Sizes 3/4"; 1"; 1 1/4"
Wattages 50-400 watts
Voltages 120; 208; 240; 277; 347; 480; 600; multi-tap
Housing Material Copper-free aluminum
Globe Material Heat- and impact-resistant glass
Lamp Socket Material Porcelain with stainless steel screw shell
Reflector Material Dome and angle: Krydon® fiberglass-reinforced polyester; High bay: Alzak aluminum


  • Luminaire is factory wired; power is fed through "wireless" connection block which serves as a mechanical seal between conduit and ballast compartments, eliminating the need for an external, field installed seal; the result is fast, easy installation
  • Dome and 30° angle reflectors made of Krydon® material – won't rust, corrode, dent, chip or peel (order separately)
  • High bay reflectors of Alzak® aluminum for high wattage applications
  • Internally fluted glass globes reduce glare and provide comfortable viewing light
  • Wide range of light sources and wattages to meet specific lighting needs – 50-400W high pressure sodium (HPS); 70-400W metal halide (MH)
  • High power factor (90%+) ballasts reduce power costs – allow more luminaires per circuit
  • Four mounting arrangements to suit any lighting layout – pendant, ceiling, wall bracket and stanchion
  • Paint spray booth suitability on 50-100 watt luminaires provides efficient, economical H.I.D. lighting for areas where paint residue may accumulate on luminaires
  • Elevated ambient capability permits reliable operation at high ambient temperature; selected luminaires are suitable for ambient temperature up to 75°C
  • Integral ballasts – separate ballasts are not required; lowest installed cost
  • Factory sealed, porcelain, mogul base socket