eLLK Series Non-metallic Fluorescent Luminaires

eLLK Series Luminaires are used:

  • In hazardous areas where moisture or corrosion may be a problem
  • In offshore oil platforms, pharmaceuticals, plants, oil refineries
  • Where battery back-up is critical
  • In non-hazardous and industrial locations
Length and Lamp Type NEC: 2-ft T8 or 4-ft T8; IEC: 2-ft T8 or 4-ft T8
Lamp Wattage - 2 Lamp NEC: 17W, 32W, 17W (with battery), 32W (with battery); IEC: 18W, 36W, 18W (with battery), 36W (with battery)
Rated Voltage 120-240V, 50-60Hz; 120V, 50-60Hz; 240V, 50-60Hz
Conduit Hub Size NEC: 2 each - 3/4" Myers hub, 4 each - 3/4" Myers hub; IEC: 2 each - 20mm metric, 4 each - 20mm metric
Rated Current 0.7-0.34A

Features

  • IEC: Zone 1 and 2 areas
  • NEC/CEC: Zone 1, Division 2 areas

Electronic Ballast:

  • Operates at voltage range of 110-254 VAC ± 10%, 50-60 Hz
  • Wide ambient temperature range suitability -25°C to +55°C (eLLK92), -25°C to +50°C (eLLK92NIB)
  • Lamps operate independently – one lamp failure will not affect remaining lamp operation
  • Standard bi-pin lamps – most common lamp used in office environments; energy-efficient and cost-effective
  • Interlocked switch – automatically cuts power to both lamps and ballast when the lens is opened
  • Removable lens – hinged on both sides for easy installation and maintenance
  • Dual entries – extra large wire well eliminates need for separate junction boxes (own with cable gland and conduit hub)
  • Corrosion-resistant construction – non-metallic body, gasketed lenses, and lens locking system for an IP66, NEMA 4X rating

Battery Back-up Features:

  • Operates one lamp for 1 1/2 hours should power go out
  • Microprocessor monitors the charging functions of the battery
  • LEDs provide visual indication of battery life