Chico® SpeedSeal™ Compound

Chico® SpeedSeal™ Compound:

  • Designed to separate and form an explosionproof seal around each electrical conductor in Eaton's Crouse-Hinds EYS and EYD sealing fittings
  • Restricts the passage of gases, vapors, or flames through the sealing fitting
  • Creates a seal for Class I, Division 1, Groups C, D and Class II, Division 1, Groups E, F, G hazardous areas
Sizes 2 oz. and 6 oz.
For use with 1/2" to 2" Eaton's Crouse-Hinds Sealing Fittings
Cure Time 20 minutes
Shelf Life 18 months

Features

  • Installs a reliable seal in five minutes - every time
  • Hardens to a dense, strong mass that is suitable for Class I, Division 1, Groups C, D and Class II, Division 1, Groups E, F, G hazardous applications
  • UL and cUL Listed for use with 1/2" to 2" Eaton's Crouse-Hinds sealing fittings only
  • Packaged in a 2 oz. or 6 oz. pre-measured cartridge, eliminating the need for measuring before mixing
  • Packaged with a screw-on nozzle for accurate dispensing
  • Expands four times its original size in the sealing fitting, eliminating the need to separate the individual conductors with Chico® X fiber
  • Chico® X fiber dams are not required in horizontal applications, reducing installation times
  • Completely hardens in 20 minutes, simplifying use for OEMs
  • Suitable for cold temperature environments without the costly need to build a temporary shelter around sealing fittings; all ice crystals must be removed from inside the conduit seal before dispensing Chico® SpeedSeal compound; the Chico® SpeedSeal compound should be kept above 10°C (50°F) and below 85°F (29°C) prior to mixing; the sealing fitting must be kept at or above 4°C (40°F) during the 4 to 10 minute expansion/gel time of the compound
  • 18 months shelf life
  • Patent pending