NXT Series Stainless Steel or Sheet Steel Enclosures

cch_e_nxt_220.jpg

The NXT Series of enclosures, available in two types of material finish, have been designed to accommodate rail mounted terminals or other electrical components.

316L stainless steel is recommended to give maximum protection for components in outdoor/aggressive environments.

Enclosure Materials 316L stainless steel (standard); 304 stainless steel (optional); painted mild steel (optional)
Enclosure Finishes Stainless steel - corrosion-resistant electro-polished surface or painted - RAL 7032 (gray)
Gasket Materials Foam-in-place silicone (standard) or cut silicone for extended temperatures (optional)
Cover Mounting Fully detachable hinged cover with 2 or 3 x M6 hexagon head captive stainless steel screws
Grounding M10 internal/external ground stud or M6 internal ground stud on lid
Box Mounting 4 x external lugs, 0.433" (11mm) clearance holes/slots
Equipment Mounting 2 or 4 x stand-off pillars, 0.394" (9mm) OD x 0.590" (15mm) tall, tapped M6 x 0.394" (9mm)
Impact Resistance Minimum 7 J (Nm) to IEC/EN 60079-0, IK 10

Features

  • Twenty-eight basic sizes in five standard depths to optimize the accommodation of rail mountable terminals or components
  • Fully removable hinged cover, concealed hinges provide 180° opening
  • Cover mounting, two or three stainless steel captive screws on one side
  • Lip on upstand increases gasket contact area, ensuring high degree of ingress protection
  • Internal/external ground stud
  • 40mm wide mounting lugs for assembly on standard frames
  • Option of 0, 1, 2, 3 or 4 gland plates
  • One-piece gasket on cover and gland plates
  • Optional through cover padlock hasp available