RGL4 Runway Guard Light - LED
The RGL4 (Runway Guard Light) is used to enhance the visibility of taxiway holding positions, preventing runway incursions and warning pilots they are approaching an active runway. Two RGL4 fixtures are installed one at each end of the holding position line. Each fixture alternately flashes its two signal heads.
| Compliances | FAA AC 150/5345-46: L-804; EB67B ICAO Annex 14, Fig. A2-25 |
| Fixture Type | 804E4 |
| Input Power | 066 = 6.6 Amp Series Circuit (Mode 1); 024 = 24 VDC (Solar applications, battery pack and solar panel not included, consult factory); 120 = 120 VAC (Mode 2) |
| Options | 1 = External ON/OFF switch, 6.6 A (Standard on voltage model); 2 = Monitoring cable, 5 pin (Standard on voltage model); 3 = Anti-rotation plate for 16-inch diameter baseplate |
Features
- ETL certified
- Uses two 21W LED optical assemblies
- Average LED life of 50,000 hours
- LED lighting reduces circuit load
- Operates on FAA constant current regulators, both 3 and 5 step
- Adjustable light beam elevation with positive locking in one-degree increments
- Minimum average intensity exceeds 3000 candelas in traffic yellow
- Alternately flashes 45-50 times per minute
- Easy to maintain – no special tools required
- External ON/OFF switch allows field maintenance without de-energizing entire power loop (see Option 1)
- High strength frame and aluminum housing
- Independent black signal head visors provide protection during inclement weather conditions and enhanced contrast during daylight operations
- Base mounted with 2 inch frangible coupling and tether
- Supplied with tether and 12 inch anti-rotation locking plate
- 300 MPH jet blast resistant
- Base unit supplied with a dry contact output for monitoring
- Computer control and monitoring available (consult factory for assistance)
