11020C00LO Trail Charger
The Eaton Controls and Power Conversion Trail Charger allows the operator to charge a remote battery bank at a regulated 14V. This approach eliminates voltage loss due to long wire lengths. The Trail Charger is designed to provide a regulated 14Vdc at a full 20 AMP or 50 AMP charging rate. The Trail Charger charges the lift gate batteries at the voltage they need in order to take a charge, working to keep the batteries in a charged state ready for your next lift. The Trail Charger also eliminates or reduces the need for additional cables.
|Voltage Input||9 to 14|
|Special Features||Lock Outs|
Introduction to the Trail Charger
All three models of the Sure Power Trail Charger act like a voltage amplifier, similar to how a stereo amplifier increases sound output, a Trail Charger amplifies voltage. Think of it as a booster that compensates for the voltage drop in the wiring to the lift gate batteries. With the Model 11020C00, 11020CLO and 11050C00, the level of amplification depends on the outside temperature. Batteries require higher voltage at lower temperatures. The Trail Charger automatically raises and lowers the voltage to optimize the charge to the auxiliary battery bank.
Trail Charger with Lock Outs
The model 11020CL1 monitors a brake light or other input signal and reduces the output current when the input signal is activated. A second input can also monitor the trailer dome lamps and reduce output current when the dome lamps are active.