Low Profile Compact Circuit Protector

UL Class G, CC, midget and IEC 10x38mm aM/gG fused disconnect switches

The revolutionary Bussmann series Low Profile Compact Circuit Protector (CCPLP) fused disconnect switch is available in 1-, 2- and 3-pole versions for UL Class CC (up to 30A), Class G (20A), 13/32”x1- 1/2” midget UL (up to 30A) and IEC 10x38 aM/gG (up to 32A) fuses.

The CCPLP has the smallest footprint of any UL 98 Listed fused disconnect switch with up to a 200kA SCCR to help improve equipment SCCR.

Class G and CC versions are easy to selectively coordinated with upstream CUBEFuses™ using published fuse ampacity ratio tables.

Unique panel mounting permits easy integration into many panel designs and provides a high SCCR alternative to low profile circuit breakers on the market.

Product profile no. 10402

Data sheet no. 10372

Full line catalog no. 1007, Section 11, Disconnect Switches

Data center application note No. 10079

CAD drawings - See "DRAWINGS AND DESIGN SUPPORT" tab below

Catalog Number CCPLP-(poles)-(amps)G (Class G fuses), CCPLP-(poles)-30CC (Class CC fuses), CCPLP-(poles)-30M (midget and IEC 10x38C fuses)
Volts - 600 Class G and CC
- 240 UL midget
- 400, 500, 550 10x38 (fuse ampacity dependent)
Amps - 20 Class G
- 30 Class CC
- 30 UL midget
- 32 IEC 10x38
SCCR - 100kA Class G
- 200kA Class CC
- 10kA UL midget
- 120kA 10x38 IEC
Impulse voltage 8kV
Poles 1-, 2- and 3-pole versions available for each fuse type
Agency information Class G fuse versions
- UL 98 Listed, Guide WHTY
- IEC 60947-3 AC-23A
Class CC fuse versions
- UL 98 Listed, Guide WHTY
- cULus to CSA Standard 22.2 No. 4-04, File 302370, Guide WHTY7
- IEC 60947-3 AC-23A
UL midget and 10x38 IEC fuse versions
- cULus Listed to CSA 22.2 No. 14-05
- UL 508 Listed, File E320230, Guide NRNT
- IEC 60947-3 AC-23A
Terminals and conductors - Screw terminal - #10-32 phil-slot screw with external tooth lock washer — use with properly rated/UL Listed ring or fork terminal
- Pressure plate terminal - #10-32 phil-slot screw — single 22-6AWG solid or stranded
- 75°C/90°C Cu
Mounting - Front panel mounting with customer supplied M3 screws
- Mounting screw torque 4-5 Lb-In (0.4-0.5 N•m)