Quik-Spec™ Power Module elevator disconnects

Fusible power switch or panel with shunt trip and fire safety interface to allow for single point tie-in with fire alarm system.

Power Module Switch data sheet No. 1145

Frequently asked questions No. 10486

Power Module Switch product profile No. 10268

Power Module Switch Section-16xxx specifications No. 3208

Power Module Switch installation leaflet No. 3A1341

Power Module Panel data sheet No. 1146

Power Module Panel product profile No. 10269

Quik-Spec Family of products brochure No. 10015

Warranty statement No. 3A2780

Catalog details

Building Information Modeling

Ordering

The Bussmann Quik-Spec™ Power Module Switch and Panel are factory configured to the specific application. Contact your Bussmann representative to place your order. Have all relevant electrical and circuit information on hand.

Catalog Number PS_, PMP-_
Specifications Power Module Switch - See Data Sheet # 1145
Power Module Panel - See Data Sheet #1146
Volts 600Vac, 3Ø
Amps Power Module Switch - 30-400A
Power Module Panel (feeder switch) - 30-200A
Power Module Panel (main switch) - 400-800A - Contact Cooper Bussmann for applications greater than 800A.
Assembly SCCR 200kA rms
Agency Information - Complies with NFPA 70 (NEC®)
- Elevator Shutdown – ANSI/ASME A17.1, 2.8.3.3.2
– NEC® 620.51(B) (Elevator Shutdown)
– NEC® 240.12 (Orderly Shutdown)
- Shunt Trip Voltage Monitoring – NFPA 72, 6.16.4.4
- Selective Coordination – NEC® 620.62
- Auxiliary Contact (Hydraulic Elevator) – NEC® 620.91(C)
- Power Module Switch (PS); UL Listed (UL 98) Enclosed and Dead front switch Guide 96NK3917, File E182262, NEMA 1, UL 50 Listed enclosure**, cUL per Canadian Standards C22.2, No. 0-M91-CAN/CSA C22.2, No. 4-M89 Enclosed switch.
- Power Module Panel (PMP); UL 98 Enclosed and Deadfront Switches.
**NEMA 12, 3R, and 4 enclosures also available.
Typical Applications - Elevator Disconnects
- Computer Room Shunt Trip Disconnect
- Fire Safety Interface Relay
Accessories For added safety, use the Bussmann SAMI™ fuse covers to improve maintenance personnel protection (OSHA 1910.333, paragraph C)