Class J knifeblade fuse blocks

Bussmann series modular 70 to 600 amp Class J knifeblade fuse blocks with optional covers and blown fuse indication.

Blocks dovetail together to assemble required number of poles.

Optional covers provide additional safety and indication feature speeds troubleshooting. See product broachure no. 3192 or data sheet no. 10488 for details.

Power distribution fuse blocks

Also available are 30, 60, 100, 200 and 400 amp Class J modular power distribution fuse blocks, that combine fuse block and power distribution block in one unit. See data sheet 10192.

Product profile no. 3196

Data sheet no. 10488

Power distribution data sheet 10192

Product brochure no. 3192

Product line overview video

Drawing downloads (PDF, DXF/DWG, IGS, STEP)

Catalog Number JM60100-(poles)CR (70 to 100A), JM60200-(poles)CR (110 to 200A), JM60400-(poles)CR (225 to 400A), JM60400-(poles)MW22 Double Box Lug (225 to 400A), JM60600-(poles)CR (450 to 600A)
Volts - 250V Class H and K
- 600V Class J and R
Amps 70 to 600A
SCCR - 200kA Class J and R
- 10kA Class H and K
Poles 1-, 2- and 3-Pole - Dovetail construction permits assembly of poles required by application
Agency Information UL
- Blocks: Listed cULus E14853 – IZLT & IZLT7
- Covers: Listed UL E58836 – JDVS2
CSA
- Blocks: Certified 47235 – 6225-01
Flammability Ratings - Blocks UL 94V0, self-extinguishing
- Covers UL 94HB, self-extinguishing
Conductors - 100A-200A Blocks, 75ºC/90ºC Cu/Al
- 400A-600A Blocks 75ºC Cu/Al
- 400A Double Box Lug Block 75ºC/90ºC Cu/Al
Operating & Storage Temperature Range Blocks -40ºC to 120ºC
Covers:
Non-indicating covers -40ºC to 120ºC
Indicating covers -20ºC to 90ºC

Features

  • Integral dovetails allow snapping together multiple poles at point-of-use for greater application flexibility
  • Factory assembled two- and three-pole configurations available
  • Up to four mounting holes per pole increase installation flexibility
  • Standard phase barriers between poles for additional safety
  • Design meets UL creep and clearance requirements for Industrial Control Circuits (UL 508 and UL 845)
  • 200 to 600A blocks meet the higher UL creep and clearance requirements for Industrial Power Distribution Standards (UL 98, UL 67, UL 489, UL 891 and UL 869A)
  • Optional IP20 finger-safe covers available on entire knifeblade fuse block product line:
    • High clarity see-through covers allow for inspecting wire terminations or to take thermography measurements without removing cover
    • Probe holes included for easy, safer testing and troubleshooting
    • Built-in lockout/tagout feature improves safety
  • Standard fuse clip reinforcing springs enhance electrical contact

Related Products and Accessories