CCP2 for Class CC, Supplemental and 10x38 mm fuses

The revolutionary next generation Bussmann series Compact Circuit Protector for UL® Class CC, UL Supplemental and IEC® 10x38 mm fuses delivers the smallest footprint compared to any Class CC disconnect solution — requiring up to 38% less space.

CCP2 product profile no. 10793

CCP2 data sheet no. 10789

FAQs no. 10794

Install instructions no. 3A3599

Selector and pistol handle install instructions no. 3A3695

Legacy CCP data sheet no. 1157

Legacy product end of life notice and recommended replacements

 

Contact Information

Ordering: (636) 527-3877

Technical Support: (636) 527-1270

E-mail

Catalog Number CCP2-(poles)-30CC UL Class CC fuses, CCP2-(poles)-30M UL Supplemental and IEC 10x38mm fuses, CCP2-1-DCC DC Rated UL Class CC fuses, CCP2-1-DCM DC Rated UL Supplemental and IEC 10x38mm fuses
Dimensions/volts/amps See data sheet no. 10789
Agency information UL Class CC fuse versions
- UL 98 Listed, Guide WHTY, File E302370
- cULus to Canadian Standard 22.2 No. 4-04, UL Guide WHTY7, File 302370
UL Supplemental and IEC 10x38 mm fuse versions
- UL 508 Listed, Guide NRNT, File E320230
- cULus Certified 22.2 No. 14-05
- IEC 60947-3 AC-23A
DC voltage UL Class CC version (CCP2-1-DCC)
- UL 508 Listed, cULus 22.2, No. 1405
- DC IEC 10x38 version (CCP2-1-DCM)
- IEC 60947-3, DC-23A
RoHS compliant
CE
Conductors/terminals (see data sheet no. 10789 for details - 75°C Cu/Al
- Box lug, single/dual conductor
- Fork terminal suitable for line, load or accessory connection
- 3-port multi-wire lug kit
Operating temperaturer range -20°C to +75°C (for operation over or under 25°C, consult fuse derating tables)
Accessories (see data sheet no. 10789 for details) - Multi-wire lug kit with terminal shrouds
- Selector and pistol handles for use with rotary operated switches
- 8 mm shafts for use with selector and pistol handles
- Auxiliary contacts
- PLC fuse monitor

Features

  • Extremely compact (18 mm wide per pole ) design
  • High SCCR up to 200 kA (UL Class CC) and 120 kA (IEC)
  • Disconnect rated for load isolation
  • Full voltage rated up to 600 Vac or 80 Vdc
  • UL 98 Listed Class CC version is horsepower rated and suitable for branch circuit protection and disconnect
  • IEC 10x38 version complies with IEC 60947-3 and suitable for branch circuit protection and disconnect
  • Suitable for global installations, the switches comply with UL, cULus and IEC standards accepting UL Class CC, Supplemental or IEC aM and gG/gL fuses
  • Open fuse indication
  • Standard local open fuse indicating light for each pole
  • Optional PLC fuse monitor can be utilized to signal a PLC and open a contactor to de-energize all phases, if required
  • IP20 finger-safe with 10 AWG (6 mm2) or larger wire (box lug terminals only)
  • Built-in switch interlock prohibits removing the fuse under load
  • Padlockable handle for lockout/tagout:
    • 4 mm lock for switch only
    • 1/4” lock for rotary operated switches
  • Rotary operated versions provide for through-the-door and through-the-side operation flexibility and enhanced safety with:
    • Right front switch operation
    • Left front switch operation
    • Right side switch operation
    • Left side switch operation
  • Optional selector and pistol handles available for use with rotary operated versions
  • Multi-wire lug kit with terminal shrouds allows for power distribution to multiple loads. Each lug has three ports rated for single and dual wires