200 A CCP for Class CF CUBEFuse

Revolutionary UL 98 switches now available in 200 amp capacity - space savings up to 69%

The Bussmann series 200 A Compact Circuit Protector (CCP) fused disconnect switch utilizes the finger-safe UL Class CF time-delay CUBEFuse with Class J electrical performance. With up to a 69 percent smaller footprint compared to a traditional fusible solution, this switch provides a high 200 kA SCCR to help improve panel and assembly SCCR.

The panel mount 200 A CCP switch is available with a variety of accessories to meet many application needs including rotary and flange handle operation.

Rotary operators are available for front or side (right or left) operation. Front rotary operators are for three-pole switches only while the side operator may be applied to the right or left side of 1-, 2- and 3-pole units.

Other accessories include lugs, terminal shrouds, rotary pistol handles, flange rod and cable operating mechanisms, NO/NC auxiliary contacts that easily integrated into many monitoring systems and a handle extension.

Front and side rotary operated versions are easily applied for through-the-door or through the left or right side operation to enhance safety.

Power of Space brochure no. 10820

Product profile no. 10809

Data sheet no 10801

Application note no. 7038

Video

CUBEFuse product profile no. 3083

CUBEFuse data sheet no. 9000

FAQs no. 10825

UL 508A panel shop circuit protection solutions no. 10914

Instructions

For installation sheets, click on the catalog numbers below.

200 amp switches
Lug kits (required)
Catalog no. Description
CCP2-L2-1 Stainless steel lug, 75° Cu only, 4-350 kcmil, 1 per pack
CCP2-L2-1A Aluminum lug, 75°C Cu/Al, 4-350 kcmil, 1 per pack
CCP2-MW2-3 3-port multi-wire lug, 75°C Cu/Al, 14-2, 3 per pack, includes terminal shroud
CCP2-MW2-6 6-port multi-wire lug, 75°C Cu/Al, 14-6, 3 per pack, includes terminal shroud
Rotary mechanisms (optional)
Catalog no. Description
CCP2-SM Side rotary mechanism - mounts on left or right side of 1-, 2- and 3-pole switches
CCP2-RM2 Front rotary mechanism - mounts only on 3-pole switches, requires clockwise rotating handle
Rotary handles (used with rotary mechanisms) Type 1, 4X, 12
Catalog no. Description (rotation must match switch rotation)
CCP2-H4X-B3 Short pistol handle - black/grey - clockwise
CCP2-H4X-R3 Short pistol handle - red/yellow - clockwise
CCP2-H4X-B4 Long pistol handle - black/grey - clockwise
CCP2-H4X-R4 Long pistol handle - red/yellow - clockwise
CCP2-H4X-B3L Short pistol handle - black/grey - counterclockwise
CCP2-H4X-R3L Short pistol handle - red/yellow - counterclockwise
CCP2-H4X-B4L Long pistol handle - black/grey - counterclockwise
CCP2-H4X-R4L Long pistol handle - red/yellow - counterclockwise
Shafts (12 mm use with rotary mechanisms)
Catalog no. Length
CCP2-SH2-225 225 mm
CCP2-SH2-425 425 mm
NFPA 79 compliant handle (use with rotary mechanisms)
Catalog no. Color
CCP2-NFPA-2 Red
Flange rod handle (optional)
Catalog no. Description — 3-pole switches only, cannot be used with side or front rotary mechanisms
CCP2-FLR2-21 Red/black, painted handle, Type 1, 3R and 12
CCP2-FLR2-21X Chrome handle, Type 4X
Flange cable handle (optional)
Catalog no. Description - 3-pole switches only, cannot be used with side or front rotary mechanisms
CCP2-FLC-36 36” cable, red/black painted handle, Type 1, 3R and 12
CCP2-FLC-36X 36” cable, chrome handle, Type 4X
CCP2-FLC-60 60” cable, red/black painted handle, Type 1, 3R and 12
CCP2-FLC-60X 60” cable, chrome handle, Type 4X
CCP2-FLC-120 120” cable, red/black painted handle, Type 1, 3R and 12
CCP2-FLC-120X 120” cable, chrome handle, Type 4X
Terminal shrouds and phase barriers (optional)
Catalog no. Description
CCP2-TS2-3 3-pole terminal shroud with phase shields, 1 per pack
CCP2-PB2 Phase barriers, 2 per pack
Control wire terminals optional)
Catalog no. Description
CCP2-CWK2 1/4” quick-connect control wire terminals - mounts on installed lug (cannot be used with lug CCP2-L2-1), 12 per pack
Auxiliary contacts
Catalog no. Description
CCP2-AUX-S NO + NC, 5 A, 240 V - Can be mounted on right or left side
Handle extension (optional)
Catalog no. Description
CCP2-HEX Handle extension to facilitate operating 1-, 2 and 3-pole switches. Cannot be used when side or front rotary mechanisms are installed.