200 A CCP for Class CF CUBEFuse
Revolutionary UL 98 switches now available in 200 amp capacity - space savings up to 69%
The Bussmann series 200 A Compact Circuit Protector (CCP) fused disconnect switch utilizes the finger-safe UL Class CF time-delay CUBEFuse with Class J electrical performance. With up to a 69 percent smaller footprint compared to a traditional fusible solution, this switch provides a high 200 kA SCCR to help improve panel and assembly SCCR.
The panel mount 200 A CCP switch is available with a variety of accessories to meet many application needs including rotary and flange handle operation.
Rotary operators are available for front or side (right or left) operation. Front rotary operators are for three-pole switches only while the side operator may be applied to the right or left side of 1-, 2- and 3-pole units.
Other accessories include lugs, terminal shrouds, rotary pistol handles, flange rod and cable operating mechanisms, NO/NC auxiliary contacts that easily integrated into many monitoring systems and a handle extension.
Front and side rotary operated versions are easily applied for through-the-door or through the left or right side operation to enhance safety.
|Catalog no.||Description||PDF w/ shrouds||DWG w/ shrouds||IGS w/ shrouds||IGS (no shrouds)|
|CCP2-3-200CF||3-pole, 200 amp switch||Download||Download||Download||Download|
|Accessories - shrouds not included on handle, shaft, contacts, shroud, terminal and HEX files|
|CCP2-RM2||3-pole, 200 amp switch with front rotary mechanism||Download||Download||Download||Download|
|CCP2-SM||3-pole, 200 amp switch with side rotary mechanism||Download||Download||Download||Download|
|CCP2-H4X-_3||Short pistol handle for use with 12 mm square shafts on 200 amp switches||Download||Download||N/A||Download|
|CCP2-H4X-_4||Long pistol handle for use with 12 mm square shafts on 200 amp switches||Download||Download||N/A||Download|
12mm shaft coupler for use with the pistol handles on 200 A switches
|CCP2-NFPA-2||NFPA 79 compliant handle for 200 amp switches – installs with 12 mm shaft||Download||
|CCP2-SH2-225||225 mm long 12 mm square shaft for use with 200 amp switches||Download||Download||
|CCP2-SH2-425||425 mm long 12 mm square shaft for use with 200 amp switches||Download||Download||N/A||Download|
|CCP2-AUX-S||Auxiliary contact for 200 amp switches||Download||
|CCP2-TS2-3||Terminal shroud for use with 3-pole CCP2-3-200CF||Download||Download||
|CCP2-MW2-3||3-port multiwire terminal for use with 200 amp switches||Download||Download||N/A||Download|
|CCP2-MW2-6||6-port multiwire terminal for use with 200 amp switches||Download||
|CCP2-HEX||Handle extension for use with 200 amp switches||Download||