Inline blade fuse holders

New HH2 holder for ATR micro fuses

 

 

 

 

 

 

 

 

 

See product profile no. 10484 for details on the HH2 and the complete line up of inline blade fuse holders.

Eaton's Bussmann series products offer a complete line of fuse holders to install either blade-type or glass tube fuses. Choose water resistant and/or splash-proof versions for extra protection in special applications. Four types of connectors are available to meet the needs of technicians and do-it-yourselfers:

  • Wire Loop. To install, simply cut the wire, strip ends and attach each end to the circuit. Requires the use  of additional connectors.
  • Crimp-On. Strip wire and insert into fuse holder. Crimp the connections tightly, and you're done. No additional hardware needed.
  • Self-Stripping. Easy to install — simply locate fuse holder at a convenient spot along the wire. Snap fuse holder closed around wire to pierce insulation automatically.
  • Quick-Connect. Attach fully insulated female push-on terminal onto the 1/4” quick-connect terminals.

When selecting a fuse holder, always match the device to the wire being fused. Using an undersized fuse holder will increase electrical resistance in the circuit and reduce performance. NOTE: Never install a fuse with a larger amp rating than specified for the holder.

See product profile no. 10484 for the latest in the complete line up of inline blade fuse holders.

 

Part numbering system:

Boxed units (packed one per box) XXX
Retail packs (packed one per pack) BP/XXX-RP
Bulk packs (packed 100 per box) BK/XXX

Blade-Type Fuse Holders

In-Line fuse holders for ATR (Micro) fuses

Trad’l pack Retail pack Max volts/amps Leadwire Description
HH2 32 V/15 A 2x4”/#16 Holder with cover

In-Line fuse holders for ATM fuses

Trad’l pack Retail pack Max volts/amps Leadwire Description
Low-profile ATM
HHV BP/HHV-RP 32 V/20 A 2x4"/#12 Holder with cover, red leadwires
ATM
HHL BP/HHL-RP 32 V/20 A 2x4”/#16 Holder with cover
HHM BP/HHM-RP 32 V/30 A 2x4”/#12 Holder with cover
HHU BP/HHU 32 V/30 A 2x4”/#12 Water-resistant holder
ATM-FHID BP/ATM-FHID 32 V/20 A 2x4”/#16 Holder with protective cover and open fuse illuminating LED

In-Line fuse holders for ATC fuses

Trad'l pack Retail pack Max volts/amps Leadwire Description
HHC BP/HHC-RP 32 V/20 A 2x4”/#16 Yellow fuse holder
HHD BP/HHD-RP 32 V/30 A 2x4”/#12 Black fuse holder
BP/HHD-30-RP 32 V/30 A 2x4”/#12 Holder with ATC-30 A fuse
HHF BP/HHF-RP 32 V/20 A 2x4”/#16 Holder with protective cover
HHG BP/HHG-RP 32 V/30 A 2x4”/#12 Heavy-duty holder with cover
HHR BP/HHR 32 V/30 A 2x5”/#12 Heavy-duty water-resistant holder
BP/HHS-RP 32 V/20 A #18 to 14 Self-stripping fuse holder
ATC-FHID BP/ATC-FHID 32 V/20 A 2x6”/#16 Holder with protective cover and open fuse illuminating LED

In-Line fuse holders for Maxi fuses

Part no. Retail pack Boxed (1 ea) Bulk pack (100) Maximum volts/amps Leadwire Description
HHX   X X 32V/60A 2x5”/#6 Fuse holder with cover
MAX-FHID   X X 32V/60A 2x5"/#6 Fuse holder with cover and open fuse illuminating LED